Bitcoin blockchain pruning - How to reduce Bitcoin core ...
bitcoin/bitcoin.conf at master · bitcoin/bitcoin · GitHub
Bitcoin - The Currency of the Internet
A community dedicated to Bitcoin, the currency of the Internet. Bitcoin is a distributed, worldwide, decentralized digital money. Bitcoins are issued and managed without any central authority whatsoever: there is no government, company, or bank in charge of Bitcoin. You might be interested in Bitcoin if you like cryptography, distributed peer-to-peer systems, or economics. A large percentage of Bitcoin enthusiasts are libertarians, though people of all political philosophies are welcome.
Discussion about Bitcoin. BitcoinSV restores the original Bitcoin protocol, will keep it stable, and allow it to massively scale on-chain. BSV will maintain the vision laid out by Satoshi Nakamoto in the 2008 white paper - Bitcoin: A Peer-to-Peer Electronic Cash System.
Wassabi modifications to bitcoin.conf makes port 8333 unreachable
I've been trying to track down why my bitcoin node can't be reached through port 8333, even though I have correct port forwarding rules set up on my router, and have allowed traffic on 8333 on my firewall. I checked bitcoin.conf, and noticed a section at the bottom modified by Wasabi: main.listen = 1 main.whitebind = 127.0.0.1:8333 main.rpcbind = 127.0.0.1 main.rpcallowip = 127.0.0.1 main.rpcport = 8332 I can't remember making these changes, but I suppose it's possible. Would these bitcoin.conf changes have been made Wasabi? There was a comment at the bottom of bitcoin.conf saying these changes were made through wassabee. At any rate, commenting them out restored normal bitcoin connectivity. My port can be seen as open at canyouseeme.org. What are the implications to Wasabi of leaving these lines commented out? Edit: spelling Edit 2: Clarification
On a mission to transmit the Bitcoin energy to other parts of the world. Flashback Bitcoin conf 2019 São Francisco Canal LBRY Português. #LBRY #Bitcoin #BTC
Question about "paytxfee" config variable for bitcoin.conf
Hello, I noticed that there is an option that you can specify in the bitcoin-core application called "paytxfee" and the example is given as shown below:
#Pay a transaction fee every time you send bitcoins. #paytxfee=0.000x
I'm trying to find a clear explanation of what the "x" is referring to for this value. If i were to use the following commands to estimate a fee for confirmation within 10 transactions, i would get the following:
I could then use the command bitcoin-cli settxfee 0.00012265 and i would then have set my transaction fee to a value of 0.00012265 btc per kb as my fee -- my question is as follows: If i were to set a value of paytxfee=0.05x, what would this mean? Would that mean it would use 5% of the value already calculated with estimatesmartfee? Any clarification would be helpful :) Cheers!
Using raspberry pi 4 running raspian, I tried to edit the bitcoin.conf file (which I have done before) with sudo nano and it says file is unwritable. How to fix this?
To signal non-support of Segwit2X, upgrade to 0.15, add uacomment=NO2X to bitcoin.conf and restart
To ensure you do not get forked onto the S2X chain, you do not need to do anything. If you want to be vocal about your non-support of NYA/S2X, then you can do the following. Upgrade to Bitcoin 0.15 - https://bitcoin.org/en/download Find your bitcoin.conf file, and add the following line: uacomment=NO2X Then restart your node. https://en.bitcoin.it/wiki/Running_Bitcoin#Bitcoin.conf_Configuration_File You can also do this via the command line, eg: bitcoind.exe -uacomment=NO2X We are currently sitting at just over 100 NO2X nodes: https://bitnodes.21.co/nodes/?q=NO2X as well as over 2000 0.15+ nodes
I've set up an electrumx server and let it sync all blocks without setting txindex=1 in my bitcoin.conf file. Now, I'm obviously realizing my mistake as my wallet is missing transactions. if I were to go and set txindex=1 and reindex my full node, do I need to do anything on the electrumx side of things to also resync it's blocks?
Bitcoin Core painfully slow sync times + missing bitcoin.conf file?
So I've always had trouble syncing my bitcoin qt client, the times are painfully slow, (if it's even progressing at all) and I found out that the bitcoin.conf file is not created automatically and couldn't find out how to create one, there are so many flags to use. Any help?
Please help - why is my Bitcoin Conf file in the wrong directory?
I am running a Bitcoin Core GUI-based full node on Windows 10. The conf file is in my bitcoin data directory, instead of being in the appdata/roaming folder. But bitcoind and bitcoin-cli continue to look for the conf file in that appdata/roaming folder, which I guess is the reason the bitcoind server never appears to start. However, Bitcoin-qt (the GUI) appears to work fine and is also pointing to the conf file correctly. I checked by opening the conf file from the settings>options. How do I start bitcoind and check if it is running or not? If I run it on cmd, it appears to start downloading the whole blockchain again, which is unnecessary because I already have all of it.
Please help - why is the Bitcoin Conf file in the wrong directory?
I am running a Bitcoin Core GUI-based full node on Windows 10. The conf file is in my bitcoin data directory, instead of being in the appdata/roaming folder. But bitcoind and bitcoin-cli continue to look for the conf file in that appdata/roaming folder, which I guess is the reason the bitcoind server never appears to start. How do I start bitcoind and check if it is running or not? If I run it on cmd, it appears to start downloading the whole blockchain again, which is unnecessary because I already have all of it.
The client configuration file must be placed in the home category, ~ / .bitcoind, the file is called bitcoin.conf. nano ~/.bitcoin/bitcoin.conf. Enter: server=1 daemon=1 rpcuser=USERNAME rpcpassword=PASSWORD. Set the logs and password in place of USERNAME and PASSWORD. Now daemon is created to run in the background: sudo nano /etc/init/bitcoind ... By default, Bitcoin (or bitcoind) will look for a file named 'bitcoin.conf' in the bitcoin data directory, but both the data directory and the configuration file path may be changed using the -datadir and -conf command-line arguments. Operating System Default bitcoin datadir Typical path to configuration file Follow the steps below to enable prune mode in Bitcoin core wallet. 1. First locate your wallet configuration file. If you don’t find bitcoin.conf file in your Bitcoin directory then create one. 2. Open wallet, go to settings >> options and click on open configuration file. 3.The config file will be mostly empty. ## bitcoin.conf configuration file. Lines beginning with # are comments. ## # Network-related settings: # Note that if you use testnet or regtest, particularly with the options # addnode, connect, port, bind, rpcport, rpcbind or wallet, you will also # want to read "[Sections]" further down. # Run on the test network instead of the real bitcoin ... Bitcoin Core is programmed to decide which block chain contains valid transactions. The users of Bitcoin Core only accept transactions for that block chain, making it the Bitcoin block chain that everyone else wants to use. For the latest developments related to Bitcoin Core, be sure to visit the project’s official website.
💥Tone Vays On HyperWave / Roger Ver Debate / Bitcoin Markets / Much More! (Bitcoin Conference 2019) by Crypt0. 15:05. Edward Snowden- BITCOIN 2019 Live by The Crypt0 Minute. Bitcoin JSON-RPC tutorial. How to set up bitcoind on a VPS. BTC: 1NPrfWgJfkANmd1jt88A141PjhiarT8d9U. LIVE from BitBlockBoom Bitcoin Conf - Texas 👉 Subscribe so you don't miss the next one: http://bit.ly/2QKVDdV Check below for events and news The Fina... WCN T-Shirts: http://worldcryptonetwork.store Donate Bitcoin: 3NqhJSAikoFiYmZm3ACGzdw9Lr86ZiLT7K Join our New Patreon: https://www.patreon.com/wcn Subscribe ... It was an incredible honor for me to introduce Snowden at Bitcoin 2019 this year. He was the most wonderful speaker, and focused on privacy in his talk: the ...